Easy and safe: Filter fitted directly at the tank opening. This means that no dirt enters the fuel tank or the injection system during refuelling. Fits on all 3/4in filler caps.
41% lighter with the same step area as the standard foot rests. Use of the special titanium alloy also allows wear to be reduced to a minimum.When installed on TE/FE/TX 125 since MY 2017, the titanium foot peg sits 6mm lower than the production foot pegs.
This coarse air filter cover acts as an additional layer of protection and extends the filter service intervals. Recommended in extremely dusty conditions.
Recommended in extremely wet conditions.
Recommended for use on sandy surfaces. Mounting together with oiled air filter and dry dust cover 772.06.920.100 or 790.06.920.000.
The fuel connection machined from plastic and aluminum is very safe due to its clever design. After joining with the fuel coupler, the coupler is secured by simply twisting the connector so that undesired opening is eliminated.
Recommended for storing your timecard during races. Stick it directly to the seat with grip glue.
This is how the factory riders start!The factory start is mounted directly on the fork. Before the start, the fork is dipped and fixed in the desired position to shift the centre of gravity forwards. This to a large extent prevents the front wheel from lifting at the start, thus providing greater traction and perhaps securing you the odd holeshot or two. The first time the fork dips, the fixing is slackened and the fork released automatically.
The new generation of Husaberg aluminium skid plates provide the most effective protection for frame and engine:
Thanks to the special step, there’s no slipping backwards when you open up the throttle. Standard height.
Specially designed for riders over 1.80m tall. Approx. 20mm higher than the standard seat.
Also provides shorter riders with optimum control of the motorcycle in difficult terrain. Approx. 15mm lower than the standard seat.
This seat provides great freedom of movement, but still a perfect hold. The “wave surface” acts as a step even though it isn’t one. Standard height.
All Husaberg CNC parts are manufactured from highest quality aluminium and therefore not only look good but also withstand the toughest treatment. With the anodised aluminium components in the original factory look from the Pure Tech range, you can turn your Husaberg into something very special.7 mm wider contact surface than standard.
All Husaberg CNC parts are manufactured from highest quality aluminium and therefore not only look good but also withstand the toughest treatment. With the anodised aluminium components in the original factory look from the Pure Tech range, you can turn your Husaberg into something very special.
An offroad sortie is no walk in the park! Husaberg aluminium skid plates provide the most effective protection for frame and engine:
Reliably prevents damage to the powder coating by dirt, crashes or the rider’s boots. Also protects trousers and boots from burns on the exhaust side.
Protects the fork from damage in the event of a crash. Suitable for all models with 26mm front axle.